Posts Tagged ‘101’

Newer Entries »

The continuing saga of Block 5

Monday, November 9th, 2009

I’ve noticed something about a lot of my blog posts. At the end of the posts, I say I am gonna continue in the next posts and write about the next part of the subject. Then I never really write that next post. I’m kinda flaky like that.

But not today!

It’s a beautiful Monday morning, I’ve got some delicious white plums cut up, trucks are falling off the bay bridge, and my cup of coffee is almost done brewing. Time to continue the saga of Block 5, the coolest linoleum block ever to be made!

So I finished up the start of the story of Block 5 with the block completely carved. As I was carving the block, I realized that I would like another block to print to add some color to this block. This requires transferring the image from Block 5, the line art, to another block.

To do this, I printed block 5 on a sheet of mylar, as shown below:

The block is printed on mylar to transfer the image

The block is printed on mylar to transfer the image

Mylar is a thin, but rigid plastic material. The ink prints onto the mylar well, because it has a little roughness to the surface, but it does not soak in to the mylar, like ink does on paper. This is perfect for transferring images from one block to another, because the ink does not dry, and stays right on the surface.

I take the sheet of mylar, and press it against the surface of block 6 to transfer the image.

Using the mylar, the image is transfered to a fresh block, Block 6

Using the mylar, the image is transfered to a fresh block, Block 6

Since prints print backwards, I have to go through these two steps to get the image on tho the final block correctly. When I first printed block 5, it came out backwards on the mylar. When I press the mylar on block 6, it transfers the image backwards again. Double backwards, is, of course, forwards.

Printmaking Aside: This is pretty much what biog, industrial lithograph machines do, the kind that print magazines, newspapers, etc. The panel that is printed is on one roller, than there is another roller that the image gets printed on. This second roller then prints that ink on to the paper. By transferring the image twice, rather than once, the image comes out the way it looks on the block.

Back to block 6, now I have lines to use as a guide, and I carve up the block to print a flat color behind the line art. Here is block 6 after it has been carved and the ink cleaned up:

Block 6 is carved and ready to print

Block 6 is carved and ready to print

So now I’ve got these two blocks. What to do with them. What to do…

Here’s how Block 5 and Block 6 look printed together:

Block 5 and 6 printed (click for larger)

Block 5 and 6 printed (click for larger)

In the top left corner you will notice some pencil marks. I drew these on the block when I was printing the first block on the paper so that I would know where to line up the second block. It is a pretty crude system, but it worked fairly well. I only lost one print over the weekend to poor print alignment.

Now the fun begins. I combine this block with some of my other blocks to make some woodblock prints. Here’s a few of the completed prints I finished this weekend that involve Block 5 and Block 6:

Block 5 and 6 were used as background for a previous block in this print (click for larger)

Block 5 and 6 were used as background for a previous block in this print (click for larger)

I like how the blue horizontal bands extend beyond the image area (click for larger)

I like how the blue horizontal bands extend beyond the image area (click for larger)

Since it is autumn (supposedly), here's something in brown (click for larger)

Since it is autumn (supposedly), here's something in brown (click for larger)

If you want on the inside list for the release of these prints, sign up for the Bad Deacon Design newsletter by clicking here.

Tags: , , , ,
Posted in Prints and Printmaking | 1 Comment »

Inside the Birth of a Block

Friday, November 6th, 2009
Sometimes it all begins with a small sketch

Sometimes it all begins with a small sketch

I like to give you an inside look at how I create woodblock prints. To that end, I present The Birth of Block 5.

Block 5 is another block used to make the 101 Woodblock Series. I number all of the blocks that I make, just because, well, I like a nice stack of numbered blocks. This block is the fifth block I’ve carved for the series of prints, with quite a few blocks left to go. Block 6 and 7 have been carved since I finished this block.

Like most of my good ideas, this one started out as a little sketch doodle on a notepad. I have a lot of note pads laying around at my desks, because I know that I have a tendency to forget stuff. Notes and lists are a vital tool for me.

I often get an idea when I am writing down notes, and doodle it down on a sheet of note paper. On the left is my original doodle for the image that I eventually carve in to Block 5.

You can see some of the notes in the corner of this sketch, I actually have no idea what these notes mean. I guess I need to take better notes…

When I do quick sketches like this, I am not too worried about detail. What I am drawing is the overall image that I have in my head. I try to get the overall feel of the image, the balance, and the major elements down on this paper.

Next I graduated to a larger sketch pad, the results are below:

A larger concept sketch

A larger concept sketch

I draw in blue pencil so that I can later go over the image with a regular pencil or a pen to darken up the image. I picked up this habit from comic book illustration. The pencils for each page are often done in blue pencil. Blue pencil does not reproduce in a photocopy machine, so when the page is inked and then copied to prepare it for color, the original pencils don’t show up.

I picked up this habit of working because I like how I am able to draw a light sketchy line, which I can then ignore or reinforce with a darker line as I refine the image.

Next I got out Block 5 and drew the image on the block in blue pencil again. When I had an image that I was happy with drawn in pencil, I went over the image in ink. Here is the partially inked block, you can see both the blue pencil and the ink drawing:

The design sketched in pencil, and partly finalized in ink

The design sketched in pencil, and partly finalized in ink

As I inked the image onto the block, I realized that I like the look of the ink drawing, and decided to carve the block so that it would have the look of a line drawing when it was printed. This was a change from my previous plan, which was for this block to print the flat shapes of the leaves.

I realized that I had done that before with some of my previous prints, so I decided to do something different with this block.

Another comment on this block’s image: one of the things that I was unsatisfied with on my previous prints was the how sparse the image felt. The previous images felt rather empty to me, and I wanted to create an image that was more abundant with growth, so to speak.

Finally, I sat down and started carving this block. Here is the partially carved block:

The block is partially carved

The block is partially carved


It turns out that carving a block so that it will replicate an ink drawing takes a long time. I spent around 10 hours carving this block. I had to be precise with my X-acto knife to follow the lines, to make sure the final carved line wasn’t too thick or too thin, and to make sure that the block was carved right.

One of the challenges of carving a linoleum block is that the material is not rigid. It is pretty flexible and soft. This makes it a little easier to carve than wood, but presents a problem of stability. I had to carve into the block at an angle, so that the linoleum base is bigger closer to the particle board that the linoleum is mounted on.

Each uncarved area of the block is like a little mountain sticking up off of the board surface. This is required to give each portion of linoleum stability, so it doesn’t get smashed and misshaped when I put pressure on it to transfer the ink from the block to the paper.

The result is that carving a block like this requires a lot of time and precision.

Finally, the block is finished:

The block is completely carved

The block is completely carved

10 hours and ten sore fingers later, the block is finished. At least I didn’t cut myself this time, I seem to be getting better at not doing that.

Next I’ll show how I transfer this image to other blocks, and what I carve to compliment this block.

Tags: , ,
Posted in Prints and Printmaking | 2 Comments »

Lessons From Blog World Expo: Quality Content Above All

Tuesday, October 27th, 2009

I a weekend at Blog World Expo recently. The best way to describe it is as a conference and trade show for folks that create content and distribute it via the internet.

They like to call it “New Media”, but really it is just old media distributed in new ways.

There was a whole lot of talks given about how to make money by producing content on the internet, but one point was driven home more than any others: the importance of quality content.

Without quality content, readership, followers, subscribers, etc, just won’t come.

This point hit home for me, specifically as it relates to this site and my overall goals – fame, fortune, and glory through art.

Amazing content is not easy, and it does not come naturally. It takes hard work, and a lot of it.

Printing may be like riding a bike, but that first mile or so on a bike after ten years without riding is going to be a little shaky and wobbly. This is the reason for the 101 Woodblock Series.

It’s been a long time since I spent the majority of every day in the printmaking studio, knocking out lithograph after lithograph. The 101 Woodblock Series is my chance to get reacquainted with an old friend, and catch up over a long night of drinks and stories from the good ol’ days.

My goal for this series of prints is to make each one different, no two are alike. Each one requires thought and consideration to balance the image and the colors and decide what else is needed.

The result is that this series takes a lot longer than a standard woodblock edition, where each print is the same, and also that I am having that long night catching up, telling the old stories that we remember, and reacquainting ourselves with an old friendship.

In other words, I am forcing myself through a crash course of printmaking to re-learn the means and methods required to make beautiful art.

Of course, my work is your benefit, because when these are all done, I will be giving these out for a fraction of the real value. I want to celebrate this old friendship with printmaking by putting a piece of handmade artwork in your hands for less than the cost of a burger and a beer (my favorite meal).

If you’re not already signed up, head over to the 101 Woodblock Series page, and sign up for the newsletter for updates on the series, and notice of how to get one of these hotcakes into your hands.

Tags: , , ,
Posted in Other Stuff | 1 Comment »

How to Print a Woodblock

Wednesday, October 14th, 2009

Here we go, part 3 of a series explaining what a woodblock print is and how it is made. Part 1 explained what a Woodblock Print is, and Part 2 discussed preparing the block and the ink.

Printing a woodblock consists of rolling ink on the block, and pressing paper against it. There are many more nuances to it though, which I’d like to explain.

To explain the printing process, I have to take a step back and explain how prints with multiple colors are made. There are a few processes that can be used; the most common is to carve a separate block for each individual color. Each block is printed separately, and the the image is created as the colors are added to the paper.

Here’s an idea of how the different blocks look that go into a multi-colored print:

3 blocks used to print 5 different colors

3 blocks used to print 5 different colors

These 3 blocks were used to make the prints that came off the press yesterday. I had to print each block individually with a different color.

A woodblock print made from the 3 blocks shown above

A woodblock print made from the 3 blocks shown above

I did something a little tricky with two of these blocks, I used different portions of the blocks to print different colors. The two leftmost blocks in the image above had a lot of space left on the block after I finished carving the first image, so I used each of the blocks to also print part of the “vase”.

The image to the right is one of the prints made with these blocks. If you look at it closely, you will be able to see which part of which block printed which color.

You will also notice one other aspect to printmaking, which is that everything prints in reverse. When a block is printed against the page, the mirror image of what is on the block ends up on the paper.

Now that I’ve got 3 blocks with a total of 5 colors to be printed, the challenge is to align each of the blocks on the paper. This process of making sure all the blocks line up is called registration. In some way or another, I have to make sure that the blocks all register with one another.

(The question of how the blocks are carved in the first place so that all the images line up is another question for another day)

Before I do that though, I have to ink up the block! The block is inked by simply rolling the roller in the ink, and then rolling it on the block. It takes a few passes of ink on the block to (1) get enough ink on the block to print, and (2) get an even layer of ink on the block so that the color is consistent. Both of these are done by taking time and rolling the ink on the block a number of times.

The ink rolled onto a portion of the block, ready to print

The ink rolled onto a portion of the block, ready to print

I roll the ink on the block, then roll it back in the well of ink that I previously rolled out. I repeat this until their is enough ink and the thickness is consistent.

Next, I use my simple registration system – a ruler. The ruler I use is one inch wide, and luckily enough, the margins on these prints is 1 inch as well. I place the ruler along the left side of the paper, and I align the block against the edge of the ruler, with the top of the block 1-1/4 inches below the top edge of the paper.

I use a ruler to align all the blocks in the same place on the paper

I use a ruler to align all the blocks in the same place on the paper

This part of the process is delicate, because if I move the block on the paper, the ink will smear a little bit, and that does not look very nice. I’ve got one chance to lower the block directly onto the paper in the right place with the help of the ruler.

When I get around to printing the next block, I will place the ruler against the edge of the paper again, and line up the next block with the ruler. This way, I make sure that each block gets printed in the same place on each sheet, and all of the colors will line up with each other.

So now the inked block is lying down on the paper. I slide the paper and block off of the table, and flip them over together. I am not so fancy as to have a printing press in my little apartment, so I use a wooden spoon. The spoon in the picture was actually part of a sushi making kit that I got as a gift.

Mmmm. I love the sushi. It’s an incredible food.

The block is flipped over with the paper on top, ready to be pressed with the wooden spoon

The block is flipped over with the paper on top, ready to be pressed with the wooden spoon

This spoon, though it is made for sushi, also seems to be made for woodblock prints. It is very wide, and nearly flat, but with e slight curve to the backside. I rub the backside of the spoon over the back of the paper, pressing it against the block. This takes a few minutes of pressing, because I like to make sure that I get the ink transferred onto the paper well.

When I’m all done, I pull off the paper, and see the ink transferred over. Nice and simple!

The ink is transferred onto the paper, it will take a few more blocks to complete this image

The ink is transferred onto the paper, it will take a few more blocks to complete this image

The real joy of this process is seeing what each block adds to the image. I usually have an idea of how the finished prints will look as I am carving the block, but that vision in my mind can never compare to what I see when I pull the paper off of the block for the first time. Each time a new color is added, I get very excited that first time that I remove the paper from the block and reveal how it looks.

Tags: , , , , , ,
Posted in Prints and Printmaking | 1 Comment »

New Art Hot Off The Press

Monday, October 12th, 2009

I’ve got something to show for my last few days work. If you like this art and want to keep up to date on when it will be available for you to buy (for ridiculously cheap prices), then go to the 101 Woodblock Series page and sign up for the newsletter.

This series is all about the combination of gears, flowers, plants, and graphic design. Yeah, it’s an odd mix, and I promise to explain it some day. In the meantime, you’ll have to settle for enjoying some previews of the art.

A New Woodblock Print - Hot Off The Press!

A New Woodblock Print - Hot Off The Press!

Another 101 Woodblock Series Print

Another 101 Woodblock Series Print

One More Print from the 101 Woodblock Series

One More Print from the 101 Woodblock Series

Tags: , ,
Posted in Prints and Printmaking | 5 Comments »

Carving Blocks and Rolling Ink

Monday, October 12th, 2009

This is the second article about how a woodblock print is made. In the last post, I talked about the materials and tools I use to make prints. In this post I show you how I carve the block and prepare the ink.

Carving the block

I’ve lead you on a bit. I really have.

I’m sorry.

Now I have to confess something. It’s a little embarrassing, but I hope you will understand a little.

I actually… don’t use blocks of wood for all my woodblock prints. A lot of the time I actually use linoleum. The linoleum is mounted on a woodblock to keep it rigid, if that counts.

Linoleum is similar to wood, and it is a little easier to carve, because it doesn’t have the grain that wood does. The printing surface is different, so the ink has a different texture when it is printed on the paper.

Here’s the block I am going to show you today to demonstrate how the ink is printed:

A carved linoleum block

A carved linoleum block

This block is mostly carved already. There is one little bit of carving left to do. The arc on the left is designed to be reminiscent of a vase for flowers, so I will just call that the “vase”. I used a block marker to draw the area that I want to carve away.

I’d like a highlight on the curved surface, so I need to carve away this area so that ink will not print there.

Close up on the newly carved portion

Close up on the newly carved portion

I usually draw this outline in pencil, and I do not color it in like shown above. I used the black pen to make it easier for you to see in the photograph.

I use my X-Acto knife and gouges, and carve away the area I drew in black. I am very careful when I carve delicate areas like this, to make sure that I get the detail that I want, and that I don’t slip and make mistakes. A small area like this takes me about 15 minutes to carve.

The finished block is shown at the left. I am only going to print this vase in this run, the rest of the linoleum will be printed with other colors. I left the big blob of linoleum along the top edge uncarved, because I may eventually use that part of the block to carve another pattern into. I think another gear may look nice there.

The Ink Job

Now I get started with the ink.

The ink is mixed and ready to roll

The ink is mixed and ready to roll

I’ve mixed up some red ink with a touch of white. The ink that I am using is basic woodblock printing ink that I got from the art store. I use oil-based ink, because I think it lasts longer and looks better. Oil-based ink takes longer to clean up, and requires nastier chemicals like paint thinner.

I use a palette knife to mix the ink together, and when it is all mixed, smear it in a line about the width of my roller. The roller itself is a soft rubber roller. In general, rollers come with either soft rubber or hard rubber surfaces. I prefer the soft, because it covers the block with ink better.

Just like it is easier to spread soft butter across a piece of toast, it is easier to get the ink spread onto the block with a soft roller. The roller conforms to the surface of the block, and accounts for the uneven surface of the block.

I roll out an even layer onto the glass from the fount

I roll out an even layer onto the glass from the fount

One thing you will notice in the photo above is that the roller is rested on its back. If the roller is left resting on the roller portion, a flat dent can form in the rubber itself. This isn’t such a big deal with these cheap rollers from the art store, but once I get the roller I want, it will matter quite a bit. Good rollers are made of high quality rubber, and cost well over a hundred bucks.

A quick aside – I roll out the ink on a big sheet of glass. Glass is a perfect surface to roll ink on because it is very smooth, and it is not porous, so the ink does not soak in to the surface at all. This makes it easy to scrape the ink away, and to clean it up when I am done.

Next I roll out the ink as shown above. I don’t roll out all of the ink, but just the right amount. Learning what the right amount is takes a little experience. I can’t quite explain it, because I know the right amount because of how the roller feels rolling the ink, and how it sounds.

If the ink is too thick, the print will get smooshed, and the detail will be lost. If the ink is too thin, then it won’t print dark enough, and will look thin. To continue the toast analogy, when the ink is too thin, it is like trying to cover your toast with not enough butter.

The ink across the top is called the fount. When the ink gets too thin, I dip the roller into the fount and roll it out.

Coming Attractions

Ok, I am WAY over my morning writing power hour now, and I have to go get ready for work. Next up, printing the block, lining up different colors, and a progress report.

Tags: ,
Posted in Prints and Printmaking | 4 Comments »

What is a woodblock print?

Thursday, October 8th, 2009

Did you make a potato print back in elementary school? You cut the potato in half so there is a flat edge, then carve some sort of shape in to it, a heart or a star, then you dipped it in poster paints, and pressed it against paper. You essentially made a stamp out of a potato.

A woodblock print is no different. It is printed from a flat piece of wood that has portions carved away, so that the ink doesn’t print there.

Woodblock prints are not very common in Art History, but the most famous woodblock prints were made in Japan. You probably recognize the image below, it is a woodblock print by the artist Hokusai from 19th century Japan. This print is titles The Great Wave off Kanagawa (Kanagawa Oki Nami Ura is the Japanese title). This print was the first in a series called 36 Views of Mount Fuji. You can see Mount Fuji in the background of the image, in the dip between the waves. Hokusai’s prints are an inspiration for and influence on my own woodblock prints.

The Great Wave Off Kanagawa by Hokusai

The Great Wave Off Kanagawa by Hokusai

The Wood Makes the Print

Woodblock for a woodblock print

Woodblock for a woodblock print

To make a woodblock print, I start out with a smooth, flat piece of wood (or sometimes linoleum as a substitute). I have to have some sort of image in mind when I start. I determined that the imagery for the 101 Woodblock Series is going to be gears, flowers, and plants, so I know what I am trying to accomplish image wise.

Section of Wood

Section of Wood

The wood is special made for prints. I have actually had the block you see above for a very long time. I got this block about 10 years ago, but only recently put it to use. I believe that this block was made in Japan. The block itself is made of 5 plys (layers). The middle 3 plys are about 1/8-inch thick. The ply on the top and bottom are extremely fine. They are about 1/100-inch thick! I used my scale to measure the thickness, and it was too small to measure, even with my scale that measures in 1/60-inch increments! The direction of the grain alternates on each layer, creating a very sturdy block.

The next step is to carve the block. A woodblock is printed by rolling ink on a roller on to the woodblock. Every part of the wood that I do not carve away gets ink rolled on to it. The portions of the block that are carved away do not get ink, because the roller rolls on the flat, untouched portion of the block, missing the “valleys” that I have carved in.

Tools of the trade

Woodblock Print Tools

Woodblock Print Tools

Here’s a list of the tools I use and why and how I use them. From right to left in the picture above:

  • Compass: A lot of the imagery I like involves circles. I have a number of compasses that range in size to help me carve perfect circles. The compass shown is one of the larger compasses I use.
  • X-Acto Knife: I have a nice set of X-Acto knifes with a wide selection of blades. This set was a gift many years ago (thank you Uncle David and Aunt Kathy!), and is extremely useful. The knife shown is what I most often use for woodblocks. It is the largest of the set, and I can get the most leverage out of it. Unfortunately, this also means that it cuts me the deepest when I slip. If you don’t bleed a little for your art though…
  • Gouges: I have a set of cheap gouges that I use to remove large portions of the block. The X-Acto knife does the fine work, but these gouges do rough work. These can remove a lot of material from the woodblock quickly. The gouges I have are pretty low quality, I will have to upgrade soon.
  • Pens and Pencils: I use these to draw the image on the block before I start carving. The nice thing about a block is that unlike paper, I can draw without worrying about mistakes. In the end, the block will be carved and ink will be rolled on it, so any pencil and pen marks will not show up.

Coming Attractions

I’m out of time in my morning writing hour, so check back tomorrow for a follow up. I’ll be covering carving the block and rolling out ink. I’ll finish up with a post about printing the block and registering multiple blocks (what does that even mean?), and all the other stuff that goes in to making a woodblock print.

Tags: , , , ,
Posted in Prints and Printmaking | 2 Comments »

My Art is About Gears, Plants, and Flowers

Thursday, October 1st, 2009

I have been asked recently what kind of art I make.

When people ask me this, they aren’t asking the medium that I use (which is relief block printing), they are asking what kind of imagery I draw.

Simply put, right now, I draw gears, flowers, and plants.

Yes, that is correct, there is a gear in there.

The usual word that some art critic might use with their wacky vocabulary is “juxtaposition” to describe this, but really, I think of it in a much more simple way – I just combine them together.

I am interested in machines, how they work, how they transmit power from one place to another, and how they can be designed in rather clever ways.

Maybe this is how I ended up as a Mechanical Engineer…

I really like flowers and plants also. I see the lush green of the plants that seem to swirl and unfold out, dotted with bright points of brilliant red, white, yellow, purple, and orange of the flowers.

In a way, things that grow are a bit of the opposite of machines. One is made by nature, organic, smooth, random. The other is made by man, manufactured, rigid, exact.

My art is not a statement about society, or man, or nature, or the environment. It is about myself in one way or another. For some reason, this combination of elements fascinates me.

It is obvious to me to combine these two subjects together.

My hope is that you will find something that you find interestign amongst the images I make. Maybe one of them will jump out to you, and it will make sense to you.

The reason why may not be clear, and it may not be obvious, but in that moment when you see something you like amongst the art I am making, I feel like I have shared a little of myself with you, and you have warmly received it.

= = =

If you haven’t yet heard about the 101 Woodblock Series, it’s time to fix that! I am working on a series of woodblock prints that is a crash course through means and methods of relief printmaking.

At the end of this project, I will have 101 unique pieces of art, each of which has been printed from some combination of wood and linoleum blocks.

I want my crash course to be your benefit, so the results of this project are going to be sold to you for only the amount to cover my shipping costs and the cost of materials.

In other words, dirt cheap original, unique art.

The subject of this series is exactly what I talked abotu above, gears, plants, flowers, plus some good old fashioned design thrown in to hold it all together.

If you have started to think, “yes, that is something I am interested in”, sign up for my newsletter, and you will get updates about the project, first notice when the prints have gone on sale, and behind the scenes looks at the creative process.

Click on “101 Woodblock Series” on the left to sign up for the newsletter.

Tags: , ,
Posted in Art Commentary | 3 Comments »

I’m Busy Printmaking, No Time For Real Posts

Wednesday, September 9th, 2009

An image from the 101 Woodblock Series

The first round of completion has come around..

The second round should be complete by the end of this weekend, if my order from Graphic Chemical Supply ever shows up!

Tags: ,
Posted in Other Stuff | 7 Comments »

Art Is Design

Wednesday, May 27th, 2009

…at least it is on this site.

The scope of this site extends far beyond just web design. Design, after all, transcends just the internet.

I’ve got an art project coming up, it may be major, it may be minor, but the wheels are in motion to make it happen. It will be documented here. I plan to get this project in motion by this weekend. I just have to get a printing brayer and ink..

This project may be related to the upcoming Deacon Design 101 as well.

Tags: ,
Posted in Art Commentary | No Comments »

Newer Entries »